D1N Series | Capacity: 80–260 ton — engineered for deep drawing, heavy stamping and long-run reliability
The D1N Series D-Frame Single Crank Press is built for higher-tonnage stamping and deep drawing. The reinforced D-frame reduces deflection under load while precision slide guidance and a robust crank mechanism ensure accurate, repeatable forming and long service life.
| Model | Rated Point (V / H mm) | Capacity (Ton) | Stroke (mm) | Die Height (mm) | SPM (strokes/min) | Slide Adj. (mm) | Slide Area (mm) | Bolster Area (mm) | Main Motor (kW × Qty) | Slide Adjust Device | Air Pressure (kg/cm²) | Die Cushion Cap (Ton) | Die Cushion Stroke (mm) | Die Cushion Effective Area (mm) | Side Opening (mm) | Dimensions (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D1N-80 | 4 / 2 | 80 | 150 / 70 | 340 / 380 | 35–80 / 80–120 | 80 | 560 × 420 × 70 | 930 × 550 × 90 | 7.5 × 4 | Electrical Driving | 6 | 3.6 | 70 | 450 × 310 | 560 × 455 | 1300 × 1890 × 3000 |
| D1N-110 | 6 / 3 | 110 | 180 / 80 | 360 / 410 | 30–60 / 60–90 | 80 | 650 × 470 × 80 | 1090 × 600 × 110 | 11 × 4 | Electrical Driving | 6 | 6.3 | 80 | 500 × 350 | 610 × 660 | 1420 × 1985 × 3200 |
| D1N-160 | 6 / 3 | 160 | 200 / 90 | 460 / 515 | 20–50 / 40–70 | 100 | 700 × 550 × 90 | 1190 × 800 × 140 | 15 × 4 | Electrical Driving | 6 | 10 | 80 | 650 × 420 | 820 × 810 | 1600 × 2200 × 3500 |
| D1N-200 | 6 / 3 | 200 | 200 / 100 | 460 / 510 | 20–50 / 50–70 | 110 | 850 × 630 × 90 | 1400 × 820 × 160 | 18.5 × 4 | Electrical Driving | 6 | 14 | 100 | 710 × 480 | 840 × 700 | 1750 × 2500 × 3900 |
| D1N-260 | 7 / 3.5 | 260 | 250 / 150 | 500 / 550 | 20–40 / 20–50 | 120 | 950 × 700 × 100 | 1530 × 840 × 180 | 22 × 4 | Electrical Driving | 6 | 14 | 100 | 810 × 480 | 860 × 745 | 2780 × 1850 × 4470 |
